Tag Archives: China nmrv gearbox

China Best Worm gearbox manufacturer supplier & factory Ral9022 Silver Nmrv Worm Gearboxes with Manufacturer From China with top quality best prices

China Best Worm gearbox manufacturer supplier & factory Ral9022 Silver Nmrv Worm Gearboxes with Manufacturer From China with top quality best prices

We – EPG Group the greatest worm gearbox, couplings and gears factory in China with 5 various branches. For a lot more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Merchandise INTRODUCTION:
Major Features:
1) Created of substantial quality aluminum alloy, light fat and non-rusting
2) Large output torque and high radiating performance 3) Clean working and minimal sounds, can perform lengthy time in dreadful issue
four) Great-bathroom ept look, sturdy service daily life and small quantity
5) Suited for omnibearing installation
Primary Materials:
one)housing: aluminium alloy ADC12(dimension 571-090) die solid iron HT200(measurement one hundred ten-a hundred and fifty)
2)Worm:20Cr, ZI Involute profile carbonize&quencher warmth treatment method make gear area hardness up to 56-sixty two HRC Right after precision grinding, carburization layer’s thickness among .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-one

Product PARAMETERS:

Size Specification transmission ratio
IEC N M P seven.five 10 15 20 twenty five thirty 40 fifty sixty 80 100
D
25 56B14 50 65 80 9 nine nine 9 9 9 9 nine 9    
30 63B5 95 115 one hundred forty 11 11 11 11 11 11 11 11      
63B14 sixty 75 ninety
56B5 80 100 a hundred and twenty 9 9 nine nine 9 9 nine nine 9 nine  
56B14 fifty sixty five eighty nine 9 nine 9 nine 9 9 nine 9 9
40 71B5 a hundred and ten 130 a hundred and sixty 14 14 14 14 14 14 14 14      
71B14 70 85 one hundred and five
63B5 ninety five 115 one hundred forty 11 11 11 11 11 11 11 11 11 11 11
63B14 60 seventy five ninety
56B5 80 100 one hundred twenty               nine 9 nine nine
50 80B5 a hundred thirty one hundred sixty five 200 19 19 19 19 19 19 19
80B14 80 a hundred 120
71B5 a hundred and ten one hundred thirty 160 14 14 14 14 14 14 14 14 14 14
71B14 70 eighty five 105
63B5 95 one hundred fifteen one hundred forty eleven eleven 11 eleven
63 90B5 130 a hundred sixty five 200 24 24 24 24 24 24 24
90B14 95 a hundred and fifteen one hundred forty
80B5 one hundred thirty one hundred sixty five 200 19 19 19 19 19 19 19 19 19 19
80B14 80 one hundred one hundred twenty
71B5 110 a hundred thirty a hundred and sixty 14 14 14 14 14
71B14 70 eighty five one zero five
75 a hundred/112B5 180 215 250 28 28 28
100/112B14 110 one hundred thirty one hundred sixty
90B5 a hundred thirty 165 two hundred 24 24 24 24 24 24 24      
90B14 95 a hundred and fifteen one hundred forty
80B5 a hundred thirty one hundred sixty five 200       19 19 19 19 19 19 19 19
80B14 80 one hundred one hundred twenty
71B5 110 130 a hundred and sixty               14 14 14 fourteen
90 a hundred/112B5 180 215 250 28 28 28 28 28 28
one hundred/112B14 a hundred and ten 130 160
90B5 130 a hundred sixty five two hundred 24 24 24 24 24 24 24 24 24  
90B14 95 115 one hundred forty
80B5 130 a hundred sixty five two hundred             19 19 19 19 19
80B14 80 100 a hundred and twenty
110 132B5 230 265 300 38 38 38 38        
100/112B5 a hundred and eighty 215 250 28 28 28 28 28 28 28 28 28    
one hundred/112B14 one hundred ten a hundred thirty a hundred and sixty
90B5 a hundred thirty a hundred sixty five 200         24 24 24 24 24 24 24
80B5 one hundred thirty a hundred sixty five two hundred                   19 19
130 132B5 230 265 300 38 38 38 38 38 38 38  
100/112B5 180 215 250         28 28 28 28 28 28 28
100/112B14 110 one hundred thirty 160
90B5 one hundred thirty one hundred sixty five two hundred                   24 24
150 160B5 250 three hundred 350 forty two 42 42 forty two forty two
132B5 230 265 300       38 38 38 38 38 38    
a hundred/112B5 180 215 250               28 28 28 28

Product Define Dimensions:

Firm Brief INTRODUCTION:
We are a professional gearbox company located in HangZhou, ZHangZhoug province.
Our foremost items is  full range of RV571-a hundred and fifty worm gearboxes , also supplied hypoid helical gearbox, Computer units, UDL Variators and AC Motors.
Products are widely utilized for purposes this sort of as: foodstuffs, ceramics, packing, substances, pharmacy, plastics, paper-producing, design equipment, metallurgic mine, environmental security engineering, and all types of automatic lines, and assembly strains.
With rapidly supply, excellent soon after-income provider, sophisticated making facility, our items promote well  both at home and overseas. We have exported our gearboxes to Southeast Asia, Jap Europe and the Center East and so on.Our purpose is to build and innovate on the foundation of higher top quality, and generate a good track record for gearboxes.

 WORKSHOP:



EXHIBITIONS:




FAQ:

one.Q:Can you make as for every consumer drawing?
   A: Indeed, we supply custom-made service for consumers accordingly. We can use customer’s nameplate for gearboxes.
two.Q:What is your phrases of payment ?
   A: 30% deposit just before generation,balance T/T prior to delivery.
3.Q:Are you a  ept organization or producer?
   A:We are a manufacurer with innovative tools and experienced staff.
4.Q:What is actually your manufacturing capacity?
   A:8000-9000 PCS/Month
four.Q:What is your MOQ?
   A: 1 pcs
five.Q:Totally free sample is accessible or not?
   A:Yes, we can provide free of charge sample if customer agree to pay out for the courier expense
six.Q:Do you have any certification?
   A:Yes, we have CE certification and SGS certificate report.
Contact info:
Ms Lingel Pan
 
 
For any inquiries just truly feel totally free ton speak to me. A lot of thanks for your type attention to our firm!

/ The use of first gear manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our firm and the listed substitution elements contained herein are not sponsored, authorized, or created by the OEM. /

China Best Worm gearbox manufacturer supplier & factory Ral9022 Silver Nmrv Worm Gearboxes with Manufacturer From China with top quality best prices

China Best Worm gearbox manufacturer supplier & factory Ral9022 Silver Nmrv Worm Gearboxes with Manufacturer From China with top quality best prices

China Best Worm gearbox manufacturer supplier & factory Nmrv Series 0130 Worm Speed Gear Reducers Worm Reduction Gearbox with top quality best prices

China Best Worm gearbox manufacturer supplier & factory Nmrv Series 0130 Worm Speed Gear Reducers Worm Reduction Gearbox with top quality best prices

We – EPG Team the greatest worm gearbox, couplings and gears factory in China with 5 diverse branches. For much more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

We started out our company from 1995 and now we are the a single of the chief maker of electricity transmission items. It focuses mostly on Keyless Loc ept Units, Timing Belt Pulleys, Roller Chains, Bearing, Jaw Couplings, Gears and other parts.

These goods are made in conformity with the International Common and the expectations adopted in industrialized nations around the world (DIN ANSI BS JIS) with up to knowledge products, sophisticated technologies and ideal administration system for top quality handle. It features a crew with rich expertise in this industry, focusing on global marketplace. So the goods are of very good top quality with aggressive rates.

Our goal : Offering 1st-class merchandise and service to our customers and company partners.

/ The use of unique equipment manufacturer’s (OEM) portion quantities or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our organization and the detailed substitution parts contained herein are not sponsored, accepted, or made by the OEM. /

China Best Worm gearbox manufacturer supplier & factory Nmrv Series 0130 Worm Speed Gear Reducers Worm Reduction Gearbox with top quality best prices

China Best Worm gearbox manufacturer supplier & factory Nmrv Series 0130 Worm Speed Gear Reducers Worm Reduction Gearbox with top quality best prices

Speed shop made in China replacement parts in Basel Switzerland Worm Reducer Gearbox Speed Reducer Jack Worm Agricultural Planetary Helical Bevel Worm Steering Gear Motor Nmrv Speed Reducer Gearbox with top quality

Speed shop made in China  replacement parts  in Basel Switzerland Worm Reducer Gearbox Speed Reducer Jack Worm Agricultural Planetary Helical Bevel Worm Steering Gear Motor Nmrv Speed Reducer Gearbox with top quality

We – EPG Group the most significant gearbox & motors , couplings and gears manufacturing facility in China with 5 diverse branches. For a lot more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Pace Worm Reducer Gearbox Pace Reducer Jack Worm Agricultural Planetary Helical Bevel Worm steering Gear motor  nmrv velocity reducer Gearbox

            

The use of first gear manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our organization and the listed substitution components contained herein are not sponsored, authorized, or produced by the OEM.

Speed shop made in China  replacement parts  in Basel Switzerland Worm Reducer Gearbox Speed Reducer Jack Worm Agricultural Planetary Helical Bevel Worm Steering Gear Motor Nmrv Speed Reducer Gearbox with top quality

Speed shop made in China  replacement parts  in Basel Switzerland Worm Reducer Gearbox Speed Reducer Jack Worm Agricultural Planetary Helical Bevel Worm Steering Gear Motor Nmrv Speed Reducer Gearbox with top quality

CNC nmrv 063 gearbox sales made in China – replacement parts – in Rome Italy Machining High Quality Worm Gear Screw Shaft Worm Gear with top quality

CNC  nmrv 063 gearbox  sales  made in China - replacement parts -  in Rome Italy  Machining High Quality Worm Gear Screw Shaft Worm Gear with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 distinct branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Merchandise Description
We are companies and exporters of Automobile Gears

worm equipment

Module .5, .8, 1, 1.25, 1.5, 2, 2.5, 3, 4, 5, 6
Teeth Amount 10-a hundred and fifty enamel or customized
Quantity of Begins 1, 2 or customzied
Twisting Path Still left hand, right hand
Interior Bore

three-200mm H7 or personalized

Tooth Width

five-200mm or customized

Outer Diameter,Hub Exterior Diameter(mm)

Custom-made

Materials C45 steel, Stainless steel, Plastic, Iron, metal… etc
ept Angle(°) 2°36′, 3°17′, 3°26′, 3°35′, 3°42′, 3°52′, 3°55′, 5°13′, 6°34′, 6°54′, 7°11′, 7°25′, 7°46′, 7°50′
Torsional Angle(°)

3°26′, 3°35′, 3°42′, 3°52′, 3°55′, 6°54′, 7°11′, 7°25′, 7°46′, 7°50′

We can provide personalized cnc machining areas.

Please ship us your drawings or specifications,you will acquire the rapidly response.

All design and goods are belonged to our customers.

Just before buy, please ship us your drawings and requirements. 

We will update the greatest price for you!
Loo ept ept to your reply!

Benefit
1. OEM and ODM 100% 
2. High quality 
three. Best support and very best products 
4. Superior technologies and equipments.
five. We can produce according to customer’s drawing in Professional/E, solidworks, and AUTOCAD.
six. Items assortment: Mechanical parts, Home furniture accessories, Lights parts, Car elements, Electronic equipment housing and add-ons, 

 

Item Character
-Personalized Instrument Design Drawings are Available 
-Molds are cautiously machined to the closest tolerance using the latest equipment 
-The prototype need to be developed if the consumer require
Our Firm

FAQ

Q1: Are you ept business or maker ?

A: We are factory.

Q2: Do you supply samples ?

A: Yes and we will supply samples within 5-7 function times

Q3: How lengthy can you provide us value?

A: Everything verified,we will offer you cost within 24 hours

Q4:Can you strictly stick to the need on drawings and meet up with the high precision?

A: Of training course and all your merchandise will be inspected ahead of delivery

Q5:Can we get photographs of our items with out visiting your manufacturing facility?

A: We will consider pictures or movies of your goods before delivery

Q6:Which payment phrases do you help ?

A.T/T, L/C, Western Union, Paypal , Alibaba Trade Assurance are each welcome

/ The use of authentic tools manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our firm and the shown substitute parts contained herein are not sponsored, authorized, or created by the OEM. /

CNC  nmrv 063 gearbox  sales  made in China - replacement parts -  in Rome Italy  Machining High Quality Worm Gear Screw Shaft Worm Gear with top quality

CNC  nmrv 063 gearbox  sales  made in China - replacement parts -  in Rome Italy  Machining High Quality Worm Gear Screw Shaft Worm Gear with top quality

Nmrv what is a vfd rated motor Custom made in China – replacement parts – in Mekele Ethiopia Worm Gear Reducer Auxiliary Drive Gearbox Right Angle Spiral Bevel Gearbox Worm Reducer Manufacture with top quality

Nmrv what is a vfd rated motor Custom  made in China - replacement parts -  in Mekele Ethiopia  Worm Gear Reducer Auxiliary Drive Gearbox Right Angle Spiral Bevel Gearbox Worm Reducer Manufacture with top quality

We – EPG Group the largest worm gearbox, couplings and gears factory in China with 5 different branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Goods Traits
1. Mad of large-quality aluminum alloy,gentle bodyweight and non-rusting
2. Huge output torque
3. Clean in working and lower in sound,can perform long time in dreadful circumstances.
four. High in radiating performance.
five. Great-loo ept in visual appeal,resilient in support daily life and modest in quantity.
6. Ideal for omnibearing set up.
 

sort: Worm Equipment Pace Reducer/ Gearbox
Model No.: NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150
Ratio: five,7.5,10,fifteen,twenty,25,thirty,40,50,sixty,eighty,100
Shade: Blue(Ral5571)/Silver Gray (RAL9006) Or On Consumer Ask for
Material: Housing: Measurement twenty five-110 Is Aluminum Alloy, Dimensions a hundred and ten-one hundred fifty Is Cast-Iron
Worm Wheel: ZCuSn10Pb1
Worm:20Cr
Pinion:Tin Bronze
Output Shaft: Steel-forty five#
Usages: Industrial Device: Foodstuff Things, Ceramics, Chemical, Packing, Dyeing,Wooden operating, Glass.
IEC Flange: IEC Normal Flange Or On Customer Ask for

 

: Are you ept firm or company ?

A: We are manufacturing unit.

Q: How prolonged is your delivery time?

A: Generally it is 5-10 days if the items are in inventory. or it is fifteen-20 days if the items are not in stock, it is according to amount.

Q: Do you offer samples ? is it totally free or additional ?

A: Of course, we could supply the sample for free of charge cost but do not pay out the price of freight.

Q: What is your phrases of payment ?

A: Payment=1000USD, 30% T/T in ept ,equilibrium just before shippment.
If you have yet another question, pls really feel free of charge to get in touch with us as beneath:

 

/ The use of authentic products manufacturer’s (OEM) portion figures or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our firm and the shown substitute parts contained herein are not sponsored, accepted, or produced by the OEM. /

Nmrv what is a vfd rated motor Custom  made in China - replacement parts -  in Mekele Ethiopia  Worm Gear Reducer Auxiliary Drive Gearbox Right Angle Spiral Bevel Gearbox Worm Reducer Manufacture with top quality

Nmrv what is a vfd rated motor Custom  made in China - replacement parts -  in Mekele Ethiopia  Worm Gear Reducer Auxiliary Drive Gearbox Right Angle Spiral Bevel Gearbox Worm Reducer Manufacture with top quality

Die nmrv 040 gearbox cad supplier China in Cuito Angola Cutter with Stripping Machine with top quality

Die  nmrv 040 gearbox cad  supplier  China  in Cuito Angola  Cutter with Stripping Machine  with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

Full Automatic and Manual Die-Cutting and Creasing Machine

  1. Specifications:
Model Unit QMY1200P
(SZ1200P)
QMY1300P
(SZ1300P)
QMY1500P
(SZ1500P)
Max. Paper Size  mm 1200*780 1300*960 1500*1100
Min. Paper Size mm 350*350 400*410 500*440
Max. Die-cutting Size mm 1180*760 1280*940 1480*1080
Max. Speed sh/h 0-5000 0-4600 0-4000
Max. Wor ept Pressure T 300 300 300
Corrugate sheet Thickness mm 1-7 1-7 1-7
Cardboard sheet size gsm 250-800 250-800 250-800
Die-cutting Precision mm ±0.5 ±0.5 ±0.5
Total Power KW 22.5 22.5 27.5
Total Weight kg 14500 15500 19000
Overall Dimension mm 8000*4000*2250 8750X4100X2245 9400X4600X2245

 
Features of the machine:
Main Features:

  1. The Bobst type cut structure makes the cutting platform movement like a scissor, it will realize a full and easier cut.
  2. Main worm gear uses alloy copper material, after the experienced operator’s manual scraping treatment and strict standard testing, it can ensures the driving parts 10 years life.
  3. The main chains adopt imported British Renold brand, the differences of 10 chains are less than 0.2mm.
  4. The connect between gear box and driving shaft adopts sleeve and pin structure ensuring a strong connection.
    1. Speed:  

The machine adopts frequency controller to achieve stepless speed acceleration which can reach to 4500 times per hour. During actual production, it can generally run at 3600 to 4200 times per hour according to the quality of the board. If the quality of the paper is good, a good operator even can operate the machine at highest speed.

  1. Safety:

As it is shown in the picture of the machine, the machine adopts  automatic paper feeding method which keeps the operator away from the die-cutting part. The mounting and adjustment of the die plate is also done outside of the die-cutting part with sensors and detectors at die-cutting part to ensure that the machine can not be started when the die-cutting plate is at adjustment status.
Besides the sensors at die-cutting part, there are sensor or approach switches at window part to make the whole machine at monitoring status to ensure its safety.

  1. Operation convenience:

There is Man-machine interface installed in the control panel which will shows the safety status of the machine as well as malfunctions to facilitate the operator. Camera is also installed in front of the operator for him/her to monitor the operation status at the delivery part.

  1. Main Structures and Key Material Used
    1. Four Main Big Parts:

They are: bottom station, moving platform, upper platform and machine wall. The bottom station is made of gray cast iron -HT 200; the moving platform is ductile iron – QT 42-10 and the machine wall is high quality A3 steel.

  1. Main Drive:

The 11 KW Siemens Motor together with the pneumatic clutch, worm shaft and worm gear forms a moving set to ensure stable pressure out put of not less than 300 tons.

The material for the worm shaft is 40Cr with quenching treatment and gear hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
The bearing that is used is SKF. The bush is copper alloy ZQSn6-6-3.

  1. Die-cutting and Creasing Part:

The drive is transferred via crank rod to pendulum which will bring the moving platform to move up and down to reach die-cut and creasing purpose.
The pendulum is made of high quality ductile iron. The pendulum axis is done by induction harden with surface hardness HRC 43-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely follow the specification of 1080 type automatic die-cutting and creasing machine. Compared with automatic die-cutting and creasing machine which is used for cardboard die-cutting, this type of automatic die-cutting and creasing machine is mainly used for corrugated board which needs less pressure for die-cutting, in this case quite some producers have made smaller width on the pendulum and smaller diameter on the pendulum shaft. We keep wider pendulum and bigger diameter on its shaft to make our machine last for a longer life.
The die-cutting plate uses 7 mm 75 Crl plate which has more hardness and life span than the manganese plate.  

  1. Board Conveying:

It adopts 3-cam intermittent positioning device to ensure the boarding conveying accurate and stable.
The machine uses gripper bar type with 12A long joints chain which is less in weight and less shock to the intermittent device under the precondition to ensure the strength of the chain. The brand of the chain is Renold U.K with high precise and quality. .    
The Gripper bar adopts aviation aluminum with three bridge type- light in weight and high in strength.

  1. Electric Part

The electrical parts are designed and assembled according to the European CE standard and uses world wide known brand products.

  1. Installation of Die

The die mounting and dismounting adopts side withdrawing ways which time saving and easy for operation.
There are two ways for the fixation of the die-either by bolt or clippers which are subject to customer’s advice.
The chase loc ept is pneumatic which is simple, convenient and reliable.

  1. Special Characters of Our Machine:
    1. Clever And Special Front Lay Design:

Compared with the card board sheet, the corrugated board has more strength. If the corrugated board abnormally reaches to the front lay, it will damage the front lay and the gripper bar when the front lay reaches to its highest position.
Generally the producers will install sensors on this part to stop the machine when the paper is fed abnormally to the front lay. However, when the machine is running at the high speed, the inertia will bring the machine to run for a while to make the front lay to its highest point and then also damage the front lay and the gripper bar.
Our special design is that when the abnormal board feeding happens and being detected, the front lay can never reaches to its highest point which makes free from front lay and gripper bar damages because of abnormal paper feeding.
As it is our special design, so there is no picture to be shown here.

  1. Auto-Manual Switching System

The Feeding system for this type of machine can do auto and manual. When the sheet shape is good, you can use auto-function. When the shape of the sheet is not good, you can use manual function and do sheet feeding manually.  
When the sheet is not good in shape, you can open the rear beam and lift up the feeder to do manual feeding.  

  1. Stripping Part  

 (a) The machine is half striping which can strip off three – edge waste and middle holes of the board.
 (b) There are upper chase, middle chase and lower chase where the male, elastic block and
female die are placed to strip off the waste.              

  1. Configurations:
Name Brand and Origin Remarks
Bearing SKF Swiss Key part
IKO Japan or HangZhou, China Not key part
Chain Renold U.K; Main Chain ( Discrepancy of less than 0.2 mm for per 10 chains of machine chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Photo Electric Switch Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Main Motor Siemens Joint Venture
PLC Delta, ZheJiang  
Man-machine Interface Delta  
Pneumatic Parts Sunrise, ZheJiang  
Rotary Joints SMC Japan  
Motor at feeding and delivery CPG ZheJiang  

 
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Die  nmrv 040 gearbox cad  supplier  China  in Cuito Angola  Cutter with Stripping Machine  with top quality

Die  nmrv 040 gearbox cad  supplier  China  in Cuito Angola  Cutter with Stripping Machine  with top quality

China worm shaft shimano shop China in Tucson United States Combined Nmrv Worm Gearbox Reduction Gearmotor with top quality

China  worm shaft shimano  shop  China  in Tucson United States  Combined Nmrv Worm Gearbox Reduction Gearmotor with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

Main features:
1.large SPEED RATIO range:5/7.5/10/15/20/25/30/40/50/60/80/100

 

2.small volume,low weight ,saving space for mounting.

 

3.high efficiency,high mechanical strength and high quality aluminum alloy housing

 

4.LONG LIFE service,large output torque,low noise and little vibration

 

5.low temperature rise,omnibearing installation ,easy to connect with other machinery.

 

6.high carry ability,elegant apperance.

 

7.CE standard,input power can be 0.18KW-0.75KW

 

8.stable transmission

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

China  worm shaft shimano  shop  China  in Tucson United States  Combined Nmrv Worm Gearbox Reduction Gearmotor with top quality

China  worm shaft shimano  shop  China  in Tucson United States  Combined Nmrv Worm Gearbox Reduction Gearmotor with top quality

DC nmrv 40 motovario best China in Liverpool United Kingdom Motor with Gearbox 12 Volt DC 150 Rpm Worm Gear Motor for Electric Ceiling Clothes Rack with top quality

DC  nmrv 40 motovario  best  China  in Liverpool United Kingdom  Motor with Gearbox 12 Volt DC 150 Rpm Worm Gear Motor for Electric Ceiling Clothes Rack with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

Dc Motor with Gearbox 12 Volt Dc 150 RPM Worm Gear Motor for Electric Ceiling Clothes Rack

Main Characteristic:

Motor Power: 30W, 50W,60W
Motor Out Speed: 15rpm, 36rpm, 130rpm, 150rpm, 180rpm, 210rpm
Motor Voltage: DC12V 24V 36V 42V 48V 60V
Motor size: 49mm 59mm 63mm 76mm 88mm
Motor Current: 1.0A, 1.2A, 1.5A
Gear ratio: 1: 56, 1:28 ,1:70
Gear Modulus: 70:1 M=0.8 ,
56:1 28:1 M=1
Output shaft size: 6mm 8mm 10mm 12mm(Customized)
Speed sensor : Hall sensor ,encoder,opto sensor
Motor length: 80mm
Factory Address: HangZhou Xihu (West Lake) Dis.
Gear Material: Plastic / Brass
OEM / ODM Service: Accept

NOTE:We can design and manufacture according to your required like voltage ,power,speed ,torque and dimension.

We can design and make following to your voltage, power, speed, torque, install dimension and shaft dimension etc.

The motor size from φ 59mm to φ 110mm, and the power from 30w to 180w, the out put speed can be changed by motor design or the gear box ratio, For the speed control, we designed the motor cover to install speed sensor.

Products Type  Voltage Power  No Load  Load  Load Load  Gear ratio   Motor length
V W Speed Current  Speed Current  Torque 
RPM A  RPM A N.M   mm
D59R-2430-15  24  30  15+-2    <=1.2  12+-2      1:56  80
D59R-2450-36  24  50  36+-2    <=1.2  130+-5      1:56  80
D59R-2430-130  24  30  130+-5   <=1.5  100+-5  <=6.5  >=4.0  1:28  80
D59R-2430-150  24  30  150+-5   <=1.0  130+-5  <=6.5  >=4.0  1:28  80
D59R-2430-180  24  30  180+-5  <=1.2  150+-5  <=6.5  >=4.0  1:28  80
D59R-2430-210  24  30  210+-5  <=1.5  180+-5  <=6.5  >=4.2  1:28  80

HangZhou ept Science & Technology Co.,Ltd  factory is located in Xihu (West Lake) Dis., HangZhou, we can design and manufacture of motors according to all our customers’ demands so far,we can manufacture about 60,000 motors per month.

Our main market:
Europe,America and Asia,including United Kingdom,  Germany, Italy, France, Sweden, United State,Brazil,India,Korea and so on.

Company Advantages:

  1. Big production capacity, fast delivery.

  2. Strict QC inspecting rules: all products must be 100% inspected before delivery.

  3. OEM/ODM services are available

 4. 24 hours online service.

 5. Prompt quotation for your inquiry

  6. Quality,reliability and long product life.

  7. Professional manufacturer offers competitive price.

  8. Diversified rich experienced skilled workers.

More Applications:
Car simulator ,garage door opener ,gate operator, pac ept barrier,wheelchair ,electric vehicle ,water pump ,oil pump,sewing machine,vending machine,food processor blender machine, welding machine,floor polisher,truck lift,stair lift,hospital bed ,hydraulic pump electric forklift.

RFQ:

Q: Are you ept company or manufacturer ?
A: We are Integration of ept and trade, with over 20 years experience in DC worm gear motor. Our company have accumulated skilled production line, complete management and powerful research support, which could match all of the customers’ requirements and make them satisfaction.

Q: What is your main product?
-DC Motor: Gear motor, Square motor, Stepped motor, and Micro motor
-Welding equipment: Wire feeder, Welding rod, Welding Torch, Earth clamp, Electrode holder, and Rectifier
 
Q: What if I don’t know which DC motor I need?
A: Don’t worry, Send as much information as you can, our team will help you find the right one you are loo ept for.

Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in ept ,balance before shippment.
If you have another question, pls feel free to contact us as below:

Q: How to delivery:
A: By sea – Buyer appoint forwarder, or our sales team find suitable forwarder for buyers. 
By air – Buyer offer collect express account, or our sales team find suitable express for buyers. (Mostly for sample)
Others – Actually,samples send by DHL,UPS, TNT and Fedex etc. We arrange to delivery goods to some place from China appointed by buyers.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

DC  nmrv 40 motovario  best  China  in Liverpool United Kingdom  Motor with Gearbox 12 Volt DC 150 Rpm Worm Gear Motor for Electric Ceiling Clothes Rack with top quality

DC  nmrv 40 motovario  best  China  in Liverpool United Kingdom  Motor with Gearbox 12 Volt DC 150 Rpm Worm Gear Motor for Electric Ceiling Clothes Rack with top quality

China worm gearbox manufacturers sales China in Oslo Norway RV Series Nmrv Worm Orthogonal Gear Reducer with top quality

China  worm gearbox manufacturers  sales  China  in Oslo Norway  RV Series Nmrv Worm Orthogonal Gear Reducer with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

China RV Series NMRV Worm Orthogonal Gear Reducer 

NMRV 571-150 worm gear box with flange and electric motor
NMRV+NMRV Double Stage Arrangement Reduction Gear Box
RV Series Worm Gearbox
worm speed reducer
nmrv worm gear motor

RV Series
Including RV / NMRV / NRV.
Main Characteristic of RV Series Worm Gearbox
RV series worm gear reducer is a new-generation product developed by ept on the basis of perfecting WJ series products with a compromise of advanced technology both at home and abroad.
1. High-quality aluminum alloy, light in weight and non-rusting.
2. Large in output torque.
3. Smooth running and low noise,durable in dreadful conditions.
4. High radiation efficiency.
5. Good-loo ept appearance, durable in service life and small volume.
6. Suitable for omnibearing installation.
Main Materials of RV Series Worm Gearbox
1. Housing: die-cast aluminum alloy(frame size: 571 to 090), cast iron(frame size: 110 to 150).
2. Worm: 20Crm, carbonization quencher heat treatment makes the surface hardness of worm gears up to 56-62 HRX, retain carbonization layer’s thickness between 0.3 and 0.5mm after precise grinding.
3. Worm Wheel: wearable stannum bronze alloy.

SPEED RATIO 7.5~100
OUTPUT TORQUE <1050NM
IN POWER 0.09-11KW
MOUNTING TYPE FOOT-MOUNTED FLANGE-MOUNTED

 

When working, great load capacity, stable running, low noise with  high efficiency.
  Gear Box’s Usage Field
1 Metallurgy       11 Agitator  
2 Mine       12 Rotary weeder  
3 Machine       13 Metallurgy   
4 Energy       14 Compressor
5 Transmission     15 Petroleum industry
6 Water Conserbancy     16 Air Compressor
7 Tomacco       17 Crusher  
8 Medical       18 Materials
9 Packing     19 Electronics  
10 Chemical industry     20 Textile indutry
           
Power 0.06kw 0.09kw 0.12kw 0.18kw 0.25kw 0.37kw 0.55kw
0.75kw 1.1kw 1.5kw 2.2kw 3kw 4kw 5.5kw
7.5kw 11kw 15kw        
Torque 2.6N.m-3000N.m
Ratio 7.5-100, the double gearbox is  more
Color Blue, Silver or as customers’ need
Material Iron or Aluminium
Packing Carton with Plywood  Case or as clients’ requirement
Type RV571 RV030 RV040 RV050 RV063 RV075 RV090
Weight 0.7kg 1.3kg 2.3kg 3.5kg 6.2kg 9kg 13kg
Type RV110 RV130 RV150        
Weight 35kg 60kg 84kg        
Mounting Methods Foot Installation   Flange Installation
For various  mortor or double input/output shafts can be equipped

Product picture:

Certificate:

Pac ept & Delivery:

Our company :
AOKMAN® was founded in 1982, which has more than 36 years in R & D and manufacturing of gearboxes, gears, shaft, motor and spare parts.
We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with a strong presence in the international market.
AOKMAN® has become a reliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.

Customer visiting:

FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than one hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% ept payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set
Contact:
Tel: +86~571-8822571/88220973-53667898
Fax: 0086-571-88220971: +86~571-8822571/88220973-86571652
Mobile: +86-1873657180  
Address: No.1394, Hanghai Road, HangZhou, China
Zip Code: 450016
Welcome you contace me if you are interested in our product.
Our team will support any need you might have.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

China  worm gearbox manufacturers  sales  China  in Oslo Norway  RV Series Nmrv Worm Orthogonal Gear Reducer with top quality

China  worm gearbox manufacturers  sales  China  in Oslo Norway  RV Series Nmrv Worm Orthogonal Gear Reducer with top quality

Silver use of a worm gear Cost China in Kaduna Nigeria Color Nmrv Series Worm Gearbox with Motor High Performance with top quality

Silver  use of a worm gear  Cost  China  in Kaduna Nigeria  Color Nmrv Series Worm Gearbox with Motor High Performance with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

PRODUCT INTRODUCTION:
MAIN FEATURES:
1) Made of high quality aluminum alloy, light weight and non-rusting
2) Large output torque and high radiating efficiency 3) Smooth running and low noise, can work long time in dreadful condition
4) Good-loo ept appearance, durable service life and small volume
5) Suitable for omnibearing installation
MAIN MATERIALS:
1)housing: aluminium alloy ADC12(size 571-090); die cast iron HT200(size 110-150);
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1

PRODUCT PARAMETERS:

SIZE Specification transmission ratio
IEC N M P 7.5 10 15 20 25 30 40 50 60 80 100
D
25 56B14 50 65 80 9 9 9 9 9 9 9 9 9    
30 63B5 95 115 140 11 11 11 11 11 11 11 11      
63B14 60 75 90
56B5 80 100 120 9 9 9 9 9 9 9 9 9 9  
56B14 50 65 80 9 9 9 9 9 9 9 9 9 9
40 71B5 110 130 160 14 14 14 14 14 14 14 14      
71B14 70 85 105
63B5 95 115 140 11 11 11 11 11 11 11 11 11 11 11
63B14 60 75 90
56B5 80 100 120               9 9 9 9
50 80B5 130 165 200 19 19 19 19 19 19 19
80B14 80 100 120
71B5 110 130 160 14 14 14 14 14 14 14 14 14 14
71B14 70 85 105
63B5 95 115 140 11 11 11 11
63 90B5 130 165 200 24 24 24 24 24 24 24
90B14 95 115 140
80B5 130 165 200 19 19 19 19 19 19 19 19 19 19
80B14 80 100 120
71B5 110 130 160 14 14 14 14 14
71B14 70 85 105
75 100/112B5 180 215 250 28 28 28
100/112B14 110 130 160
90B5 130 165 200 24 24 24 24 24 24 24      
90B14 95 115 140
80B5 130 165 200       19 19 19 19 19 19 19 19
80B14 80 100 120
71B5 110 130 160               14 14 14 14
90 100/112B5 180 215 250 28 28 28 28 28 28
100/112B14 110 130 160
90B5 130 165 200 24 24 24 24 24 24 24 24 24  
90B14 95 115 140
80B5 130 165 200             19 19 19 19 19
80B14 80 100 120
110 132B5 230 265 300 38 38 38 38        
100/112B5 180 215 250 28 28 28 28 28 28 28 28 28    
100/112B14 110 130 160
90B5 130 165 200         24 24 24 24 24 24 24
80B5 130 165 200                   19 19
130 132B5 230 265 300 38 38 38 38 38 38 38  
100/112B5 180 215 250         28 28 28 28 28 28 28
100/112B14 110 130 160
90B5 130 165 200                   24 24
150 160B5 250 300 350 42 42 42 42 42
132B5 230 265 300       38 38 38 38 38 38    
100/112B5 180 215 250               28 28 28 28

PRODUCT OUTLINE DIMENSIONS:

COMPANY BRIEF INTRODUCTION:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.
Our leading products is  full range of RV571-150 worm reducers , also supplied hypoid helical gearbox, PC units, UDL Variators and AC Motors.
Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.
With fast delivery, superior after-sales service, advanced producing facility, our products sell well  both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and the Middle East and so on.Our aim is to develop and innovate on the basis of high quality, and create a good reputation for reducers.

 WORKSHOP:

EXHIBITIONS:



FAQ:

1.Q:Can you make as per customer drawing?
   A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
   A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a  ept company or manufacturer?
   A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
   A:8000-9000 PCS/MONTH
4.Q:What is your MOQ?
   A: 1 pcs
5.Q:Free sample is available or not?
   A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
   A:Yes, we have CE certificate and SGS certificate report.
Contact information:
Ms Lingel Pan
 
 
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Silver  use of a worm gear  Cost  China  in Kaduna Nigeria  Color Nmrv Series Worm Gearbox with Motor High Performance with top quality

Silver  use of a worm gear  Cost  China  in Kaduna Nigeria  Color Nmrv Series Worm Gearbox with Motor High Performance with top quality