China Standard F X 1″ QD Bushing near me factory

This E QD design bushing is a high-power quality bushing with a 1″ gap. What sets this bushing apart from other bushings is the high-high quality metal design and rigid good quality handle techniques centered on quality, benefit, and premium top quality consumer provider. We also have a team of highly skilled specialists to response any concerns you may possibly have. For a lot more data or to get a wonderful estimate, remember to speak to us and we’ll be content to aid!


  • Bushing Sort: F
  • Bore Size: 1″
  • Dimension (A): .813″
  • Dimension (B): 4.437″
  • Dimension (D): 6.625″
  • Dimension (E): 2.813″
  • Dimension (F): 2.five hundred”
  • Dimension (G): .188″
  • Dimension (L): 3.625″
  • Bolt Circle: 5.625″
  • Established Screw Size: 1/2 – thirteen
  • Wrench Torque: 900 LBS
  • Fat: 11.50 LBS

Normal Mounting

one. Make confident the cone on the bushing and the inside of of the pushed solution is clear and cost-free of oil or any anti-seize lubricant.
2. Slide QD bushing on the shaft, flange finish first, then assemble crucial.
3. Place the QD bushing on the shaft. Use only a common Allen key to tighten the established screw on the crucial (hand-restricted). Never push as well difficult.
4. Slide the massive conclude of the sprocket or other portion taper hole into area in excess of the cone, aligning the drilled bolt holes on the sprocket or other component with the taper holes in the bushing flange. Then assemble the pull-up bolt and lock washer.
5. Tighten the pull-up bolts alternately and evenly to the tightening amounts demonstrated in the torque desk under. Do not use extensions on wrench handles. There ought to now be a gap between the face of the sprocket or other part hub and the flange of the QD bushing to make certain a satisfactory tapered grip and push suit. Notice: This gap must not be closed.


one. Get rid of all pull-up bolts and thread them into the threaded holes in the sprocket or other component from the flange of the QD bushing to split the tapered clamp.
2. Loosen the set screw and slide the QD bushing off the shaft.

Click and check out out much more products you happen to be hunting for.

Q1. Are you a factory?
A. Indeed. We are a manufacturing unit with far more than 15 several years of production expertise.

Q2. Is OEM and ODM support offered?

A. Of system. We have many a long time of expertise in OEM&amp ODM service.

Q3. I am purchasing from an additional provider, but want greater provider, would you match or conquer the price I am having to pay?
A. We usually come to feel we provide the very best service and aggressive charges. We would be more than pleased to personalize a aggressive quotation for you, just e-mail us.

Further data